PWM is a great way to control brightness of LEDs, speed of motors, etc. Most microcontrollers including STM8S has built in ability to generate PWM signals. In this article I share simple code to generate PWM signal in STM8S microcontroller. However, I don’t write anything about PWM theory other than basic calculation to get required… Continue reading PWM with STM8S
Recently I was creating a configurable timer circuit based Arduino Pro Mini. The circuit has a momentary push button which user can press to turn ON the device. The device will turn OFF itself once the time is elapsed. On starting, Arduino has to turn on a relay to get permanent connection to power source,… Continue reading Bootloader-less Programming Arduino Pro Mini
In previous post I showed how we can use Timer 2 as simple counter. In this post I am going to show how we can program to have interrupt when its value overflow. As simple experiment, we will toggle an LED in each second within the interrupt handler (also called ISR, Interrupt Service Routine).
Timers inside MCUs are very useful and essential peripherals for timing applications. In this article I will show Timer 2 in an STM8S (specifically STM8S103F3) can be used to blink an LED.
I successfully programmed development board having STM8S103F3P6. It is quite simple to make it blink LED. For me, it was second easiest after Arduino Uno to get started. I used SDCC as the C compiler, ST-Link v2 clone as programmer, and stm8flash to flash the binary file through ST-Link.
In this post I will detail out how we can program an AVR microcontroller, specifically ATTiny13a, with USBTinyISP and Eclipse IDE in Linux environment. I am using Ubuntu 16.04 LTS. I hope it will work in other distributions with little or no modifications.
Here is the schematic and details for creating one channel relay module. It would be capable of driving both DC and AC current when appropriate relay is used. We can connect output pin of most of microcontrollers including Arduino to control it.
I like Arduino Pro Mini boards more than other Arduino boards. Mainly because of its minimalist design. But Arduino Pro Mini does not have built in USB interface to program it directly like we do in Arduino Uno. However we can program a Arduino Pro Mini easily using a cheap CP2102 USB to TTL converter… Continue reading Program Arduino Pro Mini with CP2102 USB to TTL Coverter module